Aquamot Battery Chargers
Type | HFS 12V/10A | HFM 12V/30A | HFS 24V/10A | HFM 24V/30A | HFM 36V/25A | HFM 48V/15A | HFM 48V/25A |
---|---|---|---|---|---|---|---|
Voltage | 12V | 12V | 24V | 24V | 36V | 48V | 48V |
Current | 10A | 30A | 10A | 30A | 25A | 15A | 25A |
Length | 130mm | 310mm | 130mm | 310mm | 310mm | 310mm | 310mm |
Width | 164mm | 190mm | 164mm | 190mm | 190mm | 190mm | 190mm |
Height total | 56mm | 130mm | 56mm | 130mm | 130mm | 130mm | 130mm |
Weight | 1,2kg | 2,6kg | 1,2kg | 2,6kg | 2,6kg | 2,6kg | 2,6kg |
Suitable for |
SILICONE, AGM, Gel & lead-acid batteries; adjustbale with DIP-switches |
||||||
Suitable up to | 150Ah | 400Ah | 150Ah | 400Ah | 300Ah | 200Ah | 440Ah |
To choose the right charging power, you should consider the following steps:
- Consider the voltage of the battery bank. The output voltage of the charger and the total voltage of the battery bank have to be always identical.
- Determine the total capacity of the battery bank. ATTENTION: The capacity of the whole battery bank is only decreased in parallel connection, not in serial connection.
- The output current should be roughly 6% to 14% of the total capacity of the battery bank at AGM, Silicone, GEL and lead-acid batteries (for example: 260Ah batteries should be charged between 16A to 35A)
Show 1 to 7 (from a total of 7 products)